DTF•Kit - Ultimate DTG Printing Solution
with products that you simply can’t print direct. Until Now.
no pre-treatment needed
Lets face it, you own a DTG to make money by producing superior prints for your customers – this is all enabled by using the very latest in ink technology – water based textile pigmented inks. Now – imagine a low energy transfer film designed to work with your DTG inks so you can now decorate all the products that a DTG cannot – those hard to load or impossible to print items can now benefit from the same ink and equipment technology. Open up a tremendous opportunity with a vast range of products, simply and at a very low cost.
Starting at just €1,490.00
Bags, compendiums, caps, shopping totes, rainwear, umbrellas, apparel and loads more… All the products you wished your DTG could print – well now you can.
Based around the traditional process of a heat applied transfer, DTF•Kit is at the forefront of new technology.
Utilising a unique Transfer film where the film coating is matched to the Ink and TPU adhesion powder – this unique chemical composition allows you to go from print to press on a wide range of fabrics both synthetic and natural fibres with ultra low energy transfers whilst delivering far superior results. The transfer media is designed for any Brand of DTG pigmented inks so you are assured the very best in quality and colour.
So What’s So Unique?
Here are a few key points that detail why DTF•Kit is miles ahead of any transfer techniques currently available in todays market and the ultimate add on to your DTG garment printer.
Compare a DTF•Kit print side by side to a normal digital transfer to see the difference this new technology can make in terms of colour accuracy and vibrancy. Smooth gradients, pixel sharp photographic images, closer matched Pantone colours as standard. These are the key benefits of the DTF•Kit process. Add to this the industries BEST wash fastness, stretch and UV resistance because you are using water based textile pigmented inks – inks and transfer media actually designed for rigorous use.
Easy to Use
The DTF•Kit comes standard with a heated platen and adhesive surface for holding transfer films in place while heating the film during printing to eliminate white ink and colour bleeding
This heated platen was designed for transfer media to be printed without masking or gluing on the bed of your DTG. Once printed you simply apply the DTF•Kit TPU glue powder – it’s a fine grain powder that will stick to the white ink on your print – now just hover in a heat press until dry.
All you need to do now is place the transfer image onto your product and with a quick heat press you release the print directly to your product… your’re done!
DTF•Kit v’s Vinyl &
2 Step Toner Transfers
When printing a logo containing multiple colours, DTF•Kit is the most cost effective process to produce a logo or design hands down. With a no MOQ and ultra low cost, DTF•Kit provides operators with the peace of mind knowing that any logo can be reproduced in full colour and detail, with no compromises and for a fraction of any other transfer costs in the industry.
Run your hands across a DTF•Kit print and you will instantly feel the difference. Once applied to a product, the DTF print has no raised edge or thick texture to it like other types of printing. The hand feel of a DTF print feels more like a direct print than a traditional transfer. And because DTF•Kit uses pigmented water based inks – it gives an incredibly strong bond to any surface while delivering a superior wash, stretch, rub and UV resistance.
Traditional transfers, including 2 step papers are really designed for runs in low numbers – purely because it’s such a slow process costing many dollars per image. The DTF•Kit process can generate as many transfers as your DTG printer can print!, which equates to hundreds per hour at a fraction of the cost (especially if transfers are small for something like a backpack for example). Typically you add only a few cents to your standard ink cost – its fast, and by far the cheapest Industrial transfer that delivers superior wash, stretch. Rub and UV resistance to all fabric from vinyl, leather, polyester, cotton, canvas etc.
What’s in the DTF•KIT
Everything need to be up and running in minutes. The DTF•Kit package includes:
Heated Platen 45 x 32cm
DTF•Kit Cure Box
DTF oven for PET transfer curing. Melt DTF powder evenly without using a heat press. 100-150°C maximum temperature. Digital temperature controller and timer function. Set an audible alarm to remind you that your transfer is fully cured.
DTF•Kit shaker bottle and tray
This allows accurate TPU powder to be sprinkled evenly over the ink and any overspill is gathered in the tray. The tray has a spout for easy pouring back into you TPU bottle.
Packed in large mouth 1kg bottles allowing to keep your powder dry during storage.
DTF•Kit is a new generation print and transfer process from PPS Innovations.
With zero set up costs regardless of how many colours are in the print, DTF•Kit is a revolutionary cost-effective step forward when it comes to decorating. It’s the ultimate for minimal production costs, designed for commercial volume applications with the same practicality of a DTG Direct print with no setups and digitally produced with no MOQ.
Make An Enquiry,
Book A Demonstration Or Request Samples.
Our experts can answer any questions, and our showrooms have everything on display for demonstrations and sampling. We would be glad to help you find and implement the right print solution for your needs. Contact us today.